Back to article
3348
Setting up your product
Learn how to set up your product, connect components and enjoy the benefits of all its features.
To connect the components of your system:
- Lay the power stand flat
- Slide the lower speaker array into the power stand. (Tip: You should feel a soft click when it is in place)
- Slide the guide on the back of the upper speaker array into the channel on the back of the lower speaker array, then lower the upper array until it sits flush on the lower array. (Tip: You should feel a soft click when it is in place)
- Connect the remote control cable from the R1 remote control to the Remote jack on the power stand
- Connec a power cord from the power stand to an AC (mains) outlet
- Connect the bass module cable from the Amp 3 Out jack on the power stand to the bass module. (Tip: Insert the cable, then rotate it clockwise to lock it in the jack. You should feel a soft click when connected)
Connect audio devices to your product.
For more info, see Connecting other devices to your system.