Back to article
3348
Turning on or off Wi-Fi and Bluetooth for your product
Wi-Fi and Bluetooth capabilities of your product can be simultaneously enabled or disabled. This is useful for situations where limited system functionality is needed (e.g. if you only need the auxiliary input).
To turn the Wi-Fi and Bluetooth® capability on or off, follow these steps:
Disabling Wi-Fi and Bluetooth functionality:
- Press and hold the button on the amp for about 10 seconds
- When the amp's LED indicator turns off, release the button. Functionality is disabled
Note: After 5 seconds, the LED turns amber to indicate it is in manual setup mode. Continue holding the button until the indicator turns off to disable Wi-Fi and Bluetooth
- Press and hold the button on the amp for about 2 seconds
- When the amp's LED indicator turns on, release the button. Functionality is enabled
Was this article helpful?
Thank you for your feedback!