Back to article
3348
Assigning USB outputs
You can send audio from sources connected to your mixer into a computer through the USB. Find out how to choose which audio to send through the USB left and right output channels.
Assign the USB outputs.
All sources sent through the USB output supply post-volume control signals with all processing except reverb.
- On your ToneMatch mixer, select Prefs with the main selection knob
- Rotate the Menu button to scroll to and select USB to PC
- Press the Select button
- Rotate the Left or Right buttons to highlight left and right output source: Ch1, Ch2, Ch3, Ch4/5, Master or Aux
- Press the Select button to select the source, or press the Cancel button to exit with no change
- Press Menu to return to the Prefs menu.