Back to article
3329
Low audio from product
If the volume level heard from your product is faint or quieter than normal, try the following:
Determine if the problem is specifically related to bass performance.
If there is too little bass, see Too little bass or too much treble from product.
If there is too much bass, see Too much bass or too little treble from product.
If there is too much bass, see Too much bass or too little treble from product.
Be sure the system is set up properly and all connections are secure.
A connection may have come loose or may be connected incorrectly. For more info, see Setting up your product.
Be sure the flexible array is oriented properly for the listening area.
Position the flexible array to project sound in the direction of the listening area. If positioned incorrectly, the sound quality can suffer in certain listening areas. Also, when the array position is adjusted, the system automatically adjusts its equalization to suit the position of the array.
Check the source volume level.
The source volume may be set too low or it may be muted. If it has a power switch or volume control, be sure it is on and set to the desired level.
Reset your system.
A reset is used to correct occasional product issues. It is not something that a product should require repeatedly. For more info, see Resetting your product.
Plug in a different audio source.
Connected a different audio source to determine if the issue is related to the source: If audio is being sent to your system from a a microphone, try a different microphone; if an instrument is connected, try a different instrument.
Try a different output on the mixer or audio source.
If the audio source has more than one output (i.e. a mixer with main and aux outputs), connect to another output with the same cables to determine if the output is the issue.
Replace the input cables.
Try different input cables using the same source and same channel. If this solves the problem, the original cables may be defective.
Try a different powered speaker or sound system.
If available, connect a to different powered speaker to determine if the issue is related to the audio source or connecting cables.
Your product may need service.
If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.
Click here to start service
Click here to start service