Understanding LED indicator status lights and information

Find out what the LED indicator light on your product tells you about the status of your product.

Soundbar 550, Soundbar 850 and Ultra Soundbar light bar status indicators

The light bar is located on the left side of the soundbar, just below the top panel and above the speaker grille.

	Color	Status	Info
	White	Pulsing	System is rebooting
	White	Pulsing fast	Connecting to a Bluetooth device or to a Wi-Fi network
	White	Slides to center, pulses twice	Request confirmed (for system setting change)
	White	Left side flashes	Volume down command received. If volume button is held, the light stays lit while held
	White	Right side flashes	Volume up command received. If volume button is held, the light stays lit while held
	White	Left side glows	Audio muted
	White	Both sides glow	Audio paused
	White	Slides right to left	Downloading system update
	White	Slides left to right	Updating system
	Blue	Pulsing	Ready to connect Bluetoothdevice
	Amber	Flashes four times	Source error. See Bose app for info
	Amber	Solid	Setup mode / ready to connect to Wi-Fi
	Green	Pulsing	System ready for setup or entering Recovery mode
	Red	Solid	System error. See Light bar is red for troubleshooting

Acoustimass 300 / Bass Module 700 LED Status Indicator States

The light on the lower rear of the bass module provides power and connection status information.

	LED State	Indicates
	Off	Power-saving mode
	Amber - Blinking	Ready to pair
	Amber - Solid, dim	Disconnected from the soundbar or control console
	White - Solid	Connected to soundbar or control console
	White - Blinking	Downloading system update
	Red - Blinking	Firmware error
	Any other states	Unknown error. Bass module requires service

Virtually Invisible 300 / Surround Speakers wireless receiver LED status:

Status indicator light

	Status	Information
	Amber - Blinking	Ready to pair
	Amber - Solid, dim	Disconnected from the soundbar or control console
	White - Solid	Connected to soundbar or control console
	White - Blinking	Downloading system update
	Red - Blinking	Firmware error