Understanding LED indicator status lights and information

LED State		Description
Off		The adapter is unpowered, connected via Ethernet or the network is disabled
White (blinking fast)		The adapter is attempting to connect to a Wi-Fi network
White (slow flash)		The adapter is downloading a firmware update
White		The adapter is connected to a Wi-Fi network
White (solid 3 sec, double-flash, repeat)		The adapter is installing a firmware update
Amber (blinking)		The adapter failed to connect to Wi-Fi / network error
Amber (blinking fast)		The adapter has a firmware error
Amber (solid)		The adapter is in setup mode broadcasting its "Bose SoundTouch Wi-Fi Network"

Note: Adapters produced after DOM 4286 have a clear plastic lens in front of the indicator allowing the light from the LED to be seen more easily. Adapters produced before this DOM may require looking directly in to the hole to to see the LED.

Green LED	Orange LED		Description
Off	Off		No power. The system is disconnected from power, the audio cable is disconnected, or the system is plugged in and fully connected but not on.
5 Hz	Off		Normal operation. The system is on and is processing digital information
Counterblink			Digital signal is not present. This could be caused by a damaged or improperly seated audio input cable, or it could indicate a hardware problem in either the Lifestyle console or bass module
5 Hz Syncblink			This blink pattern would occur during a software update
1 Hz Syncblink			System powering down or system off and charging iPod

Note: The Acoustimass module requires a turn-on signal from a Lifestyle console to enable the LED status indicators.