NEW PRODUCTS ARE HERE! CHECK THEM OUT.
Stores Cart

SoundLink® around-ear wireless headphones II

Sold from 2015 – 2022

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

No power

If your product is connected to power but does not appear to be receiving power, try the following:

Be sure the headset is powered on.

On the bottom of the headset, make sure the power switch is in the on position, indicated by the visible green area under the switch. The LED will light for 10 seconds after being turned on.

Check if the headset is connected to your device with the audio cable.

The headset can be connected via Bluetooth® or the audio cable. When using the cable, no power is required so the headset does not power on to conserve power for Bluetooth use.

Check if the battery is charged.

Be sure the battery is not depleted. For more info see, Checking the remaining battery charge and Charging your headphones.

Check for and install any available product updates.

On a computer, visit btu.bose.com and follow the instructions to ensure your product has the latest features and enhancements. See Updating the software or firmware of your product.

Use a wall outlet USB charger to charge your headset.

Charger specifications vary. Be sure to use a UL/CE approved charger that provides 1 Amp. (Tip: Chargers that provide lower amperage (like a computer USB port) will take longer to charge your headset.)

Disconnect and reconnect the charging cable at both ends.

Unplug both ends of the USB cable then reconnect both ends to ensure they are firmly connected to the headphones and the USB power source.

Reset your product.

Much like rebooting a smartphone, your product might need to be reset on occasion to correct minor issues. For more info, see Resetting your product.

Your product may need service.

If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.

Click here to start service
Was this article helpful?
Submit
Thank you for your feedback!