Enjoy Free Delivery when you order today.
 

Enabling standby (low power) mode

Applies to:

  • SoundTouch® 300 soundbar

You can enable standby (low power) mode by removing the Ethernet cable, disabling Wi-Fi and clearing the Bluetooth® pairing list. Disabling Ethernet and Wi-Fi will prevent the system from connecting to your network, as well as preventing the system from being controlled by the SoundTouch® app until Ethernet and Wi-Fi are re-enabled.

Disable Wi-Fi: On the remote, press the SoundTouch® icon, then press and hold "0" until the soundbar LEDs flash

Deactivate Bluetooth: Deactivate Bluetooth by clearing the pairing list. Press and hold the Bluetooth button for 10 seconds. The Bluetooth indicator on the soundbar will blink white twice and the soundbar will emit a tone to indicate that the Bluetooth pairing list has been cleared

Within 2.5 hours, the unit will enter standby mode

To reactivate Wi-Fi, press the SoundTouch® icon on the remote, then press and hold "0" until the soundbar LEDs flash. Reactivate Bluetooth by pairing with a Bluetooth source

Was this helpful?

Submit

Thank you for submitting your comments.