Enjoy Free Delivery when you order today.
 

Pairing a Bluetooth®-enabled device (Bluetooth® models only)

Pairing the first device

press power to turn on the headset

Power

Make sure the Secondary Audio Mode selector is in the MUTE or MIX position (not OFF)

The power indicator glows green or yellow, depending on the charge level of the battery. If the light is red, the battery is low and needs replacing.

the bluetooth® indicator flashes purple to indicate the headset is in pairing mode.

note: the first time you turn on the headset, it will automatically go into pairing mode and the bluetooth® indicator will flash purple. this will only happen the first time you turn on the headset.

locate the bluetooth® menu on your device and make sure the bluetooth® feature is on

select bose® a20® from the bluetooth® device list

the bluetooth® indicator flashes blue while the devices are pairing and a tone indicates successful connection.

note: after five minutes of inactivity, the headset will automatically exit pairing mode and the bluetooth® indicator will turn off. to turn the bluetooth® feature back on, press the bluetooth® function button.

Bluetooth® function button

Pairing another device

The headset can pair with up to eight devices. To pair another device, follow these steps:

press and hold the bluetooth® function button for one second to put the headset into pairing mode. the bluetooth® indicator flashes purple

locate the bluetooth® menu on your device and make sure the bluetooth® feature is on

select bose® a20® from the bluetooth® device list. the bluetooth® indicator flashes blue while the devices are pairing

Note: The headset will automatically exit pairing mode after five minutes of inactivity.

Switching between connected devices

the headset can connect to two bluetooth® devices at a time. only one connected device can be heard at a time

to switch between two connected bluetooth® devices, pause audio on the first device and start audio on the other

to confirm connection, check the bluetooth® device list on your device

note: incoming and outgoing phone calls automatically mute all other secondary audio sources (when the secondary audio mode selector is in the mute or mix position). during a bluetooth® phone call, the intercom and the phone call will be heard as mixed.

Was this helpful?

Submit

Thank you for submitting your comments.