Free delivery & free returns
 

A pop is heard when powering on system

Turn on the mixing board or any external processors, before turning on the power amplifiers.
Equipment such as pre-amplifiers, effects processors, compressors or equalisers send a loud pop when turned on. If you turn them on when the power amplifier is on, this pop can damage the amplifier and speakers.

Make sure the ToneMatch mixer audio engine is turned on before powering on the connected L1 system.
If the ToneMatch mixer is turned on after the connected L1 system is turned on, a pop may be heard.

Did this information help?

Great, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Submit
Thanks, we appreciate the additional feedback you’ve provided