Your Wave® radio III comes from the factory ready to operate as a second-room device (room code B) when connected to a Bose® link-enabled Lifestyle® system. If you want to use your Wave® radio with your Lifestyle® system beyond a second room, you will need to change the room code to match that of the remote control you are using for that room.
Setting the room code
- Wave® radio III
Refer to your Lifestyle® system owner's guide for more information on room codes.
On the remote, press and hold ALARM SETUP/MENU until "SETUP MENU" is displayed
Press TUNE/PLAYLIST > six times until "ROOM- B" is displayed. The dashes following the room letter indicate how the microswitches should be set on the Lifestyle® system remote control
Press TIME - or TIME + to select a room code other than room B
Press ALARM SETUP/MENU to exit the setup menu or wait 10 seconds for the setup menu to end automatically