NEW PRODUCTS ARE HERE! CHECK THEM OUT.
Stores Cart

Lifestyle® 48 Series IV DVD home entertainment system

Sold from 2007 – 2012

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

Changing the video black level

The video black level lets you adjust the appearance of the video image by increasing or decreasing the depth of the dark areas of the picture. This is useful to adjust the image to look best on the connected TV.

Changing the video black level.

The video black level option is only available when a composite or S-video cable connects the media center to the TV. This option is not available if component cables connect the media canter to the TV. If the connection is made with a composite or S-video cable, follow these steps:
  1. Make sure the TV is on and that the correct input is selected
  2. Press the System button on the remote control
  3. Select the Video icon and press the Enter button
  4. Press the down arrow until "Video Black Level" is selected. Press Enter
  5. Press the up or down arrows to change to either "Normal" or "Extended"
Note: If a VS-2 video enhancer is connected, you may change the video black level regardless of which connection type you use -- HDMI, component, S-vide or composite.
Was this article helpful?
Submit
Thank you for your feedback!