NEW PRODUCTS ARE HERE! CHECK THEM OUT.
Stores Cart

CineMate® 120 home cinema system

Sold from 2014 – 2015

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

Connecting to power

Find out how to safely connect your product to a power source.

Attach the control console power cord.

The power cord is detachable. To attach the power cord, follow these steps:
  1. Connect the molded end of the power cord to the Power connector on the control console. Be sure it is firmly seated
  2. Connect the two prong plug of the power cord to a working power outlet

Attach the Acoustimass module power cord.

The power cord is detachable. To attach the power cord, follow these steps:
  1. Connect the molded end of the power cord to its jack on the Acoustimass module. Be sure it is firmly seated
  2. Connect the two prong plug at the other end of the power cord to a working power outlet
Note: If the Acoustimass module is dual voltage, set the switch to the proper voltage.
Was this article helpful?
Submit
Thank you for your feedback!