NEW PRODUCTS ARE HERE! CHECK THEM OUT.
Stores Cart

CineMate 220 home cinema system

Sold from 2014 – 2015

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

Putting a system into Setup mode

Entering Setup mode lets you connect a device to the Wi-Fi network broadcast by the Bose system. This is useful for system set up and diagnostics.

Enter Setup mode.

If a Bose app or instructions ask you to put your system in Setup mode:
  1. Press and hold the Control button on the back of the adapter for about 10 seconds
  2. Wait until the Wi-Fi light on the adapter flashes once and then glows solid amber. Then, release the button
  3. For next steps, refer to the Bose app or instructions that asked you to enter Setup mode.
Was this article helpful?
Submit
Thank you for your feedback!