Back to article
3348
Note: If the headset is near the outside of its acceptable temperature range it may switch between solid red and blinking yellow
The Bluetooth and battery indicators turn off after 10 seconds of inactivity to conserve battery power. Only the red and yellow battery lights flash continuously.
Understanding LED indicator status lights and information
Find out what the LED indicator light on your product tells you about the status of your product.
SoundLink Around-Ear Headphones LED Status Indicators
Battery Light Status (while in use)
Light Color | Blink Pattern | Description |
---|---|---|
Green | Solid | 30 minutes to 8 hours remaining battery time |
Amber | Solid | Less than 30 minutes remaining battery time |
Red | Blinking | Recharge headphones now |
Battery Light Status (while charging)
Light Color | Blink Pattern | Description |
---|---|---|
Amber | Blinking | Headphones are charging |
Green | Solid | Headphones are fully charged |
Red | Solid | Headphones are not within acceptable temperature range |
Bluetooth® Light Status
Light Color | Blink Pattern | Description |
---|---|---|
Purple | Blinking | The headphones are discoverable for pairing |
Blue | Blinking | The headphones are attempting to connect to a Bluetooth device The headphones and a mobile phone are not connected. One of them is not turned on, or the two are more than 33 feet (10 m) apart |
Blue | Solid | The headphones are connected to the Bluetooth device |
The Bluetooth and battery indicators turn off after 10 seconds of inactivity to conserve battery power. Only the red and yellow battery lights flash continuously.
Was this article helpful?
Thank you for your feedback!