NEW PRODUCTS ARE HERE! CHECK THEM OUT.
Stores Cart

SoundTouch 30 wireless speaker

Sold from 2014 – 2023

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

No audio from product

If your product seems to be set up properly but does not produce sound, try the following:

Turn up the volume of the connected device.

Set the device volume to 90–100% to send a strong signal to your product. Then, use your product to adjust the volume level.

If there is more than one Bose system on the network, be sure the correct one is selected in the SoundTouch app.

If you have more than one Bose system, tap the system tray at the bottom of the app, then swipe left or right to select a system.

Switch sources from Bluetooth® to AUX, then back to Bluetooth.

Switching to AUX and then back will make the system reconnect to the Bluetooth device.

Check for and install any available product updates.

If using the SoundTouch app for Mac or PC, close and reopen it.

Restarting the application could resolve connection and performance issues. This also restarts the SoundTouch Music Server, which is used for music libraries stored on a computer or NAS drive.

If using an Amazon Echo Dot, clear the Dot memory of other Bluetooth® devices.

If the Dot disconnects from your product, it and your product both look for previously-connected devices to reconnect. This can result in the two products not finding each other. To prevent this, remove all devices except your Bose product from the paired device memory of the Dot: In the Amazon Alexa app, go to Settings > Alexa device > Bluetooth, then select and Forget other devices. Now, if the Dot disconnects, it will only try to reconnect your Bose product.

Try connecting an audio device to the AUX input on the back of the system.

The 1/8" (3.5 mm) AUX input on the back of your speaker allows you to connect a variety of audio devices. Once connected, press the AUX button and play something on the device. If it plays as expected, the issue is related to wireless audio.

Restore the system to its factory defaults and restart the set up process.

For more info, see Resetting your product.

Reset your product.

Much like rebooting a smartphone, your product might need to be reset on occasion to correct minor issues. For more info, see Resetting your product.

Your product may need service.

If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.

Click here to start service
Was this article helpful?
Submit
Thank you for your feedback!