Save up to 40% on Cyber Monday Deals. SHOP.
Stores Cart

Bose A30 Aviation Headset

Sold from 2023 – present

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

Connecting to a non-wireless device using an AUX cable

You can connect your headset to a secondary audio source via an AUX (wired) connection. See the article for full instructions:

Making an AUX connection

Use the 3.5 mm AUX audio cable to connect a non-wireless device.

  1. Make sure the Secondary Audio Mode switch is in the MUTE or MIX position and the REVERSIONARY operation switch is set to OFF.
    NOTE: If the Secondary Audio Mode switch is set to OFF or the REVERSIONARY operation switch is set to ON, AUX audio functionality is disabled.
  2. Connect the cable to the 3.5 mm AUX port on the back of the control module.
  3. Connect the other end of the cable to the 3.5 mm port on your audio source.
    NOTE: The functions of a connected AUX audio source are not controlled by the control module.
Was this article helpful?
Submit
Thank you for your feedback!